PCB Design a Tiny Arduino In Altium CircuitMaker

741888_4b31_5
16
Dec

[maxbutton id=”4″]

COURSE DESCRIPTION

This course is a first of its kind in which you will learn from start to finish on how to design your very own custom Tiny Arduino Printed Circuit Board (PCB). This course will help you to improve your PCB design skills which will help you to get started freelancing or to get a job in PCB design with Altium CircuitMaker being one of the top FREE PCB design tools used around the world.

LEARNING OUTCOMES

  • I will show you how to get started in the world of PCB design using Altium CircuitMaker
  • I show you how to download and install Altium CircuitMaker as well as demystify the user interface.
  • I take you step-by-step on how to find and download the component library for the Tiny Arduino.
  • How to recreate the Arduino Nanite Schematic in Altium CircuitMaker as well as wiring components in Schematic view
  • I show you how to transfer your schematic into PCB view as well as define the board shape
  • Once the board shape is defined, I show you how to place components on the board, create a multilayer board ( we are going to use 4-6 layers) .
  • For a 4 layer board, I teach you how to route between layers and how to strategically place components on to the board design.
  • Show you how to autoroute, when you are faced with a complex design to save time.
  • Correct your design and eliminate design errors before sending them to your manufacturer. This will save you money for numerous design iterations
  • Finally I teach you how to create Gerber files, which are files that your manufacturer can read to create your Printed Circuit Board.
  • This course will be updated regularly with new lectures, resources, quizzes and content.

Course Curriculum

Total learning: 16 lessons Time: 2 hours
  • Introduction  0/3

    • Introduction2m
    • Important before Embarking on this course1m
    • How to Download and Install Altium Circuit Maker7m
  • Schematic Desgin  0/3

    • Adding Components to Schematic Design12m
    • Wiring the Schematic Diagram in CircuitMaker14m
    • Assigning Designators, Compiling Project and Cleaning up Schematic Design10m
  • Printed Circuit Board Design  0/6

    • Importing Components and Defining Board Shape4m
    • Placing Components on the Arduino Nanite11m
    • Design Rule Check and Multilayer PCB Components8m
    • Optimizing Component Placement in Altium CircuitMaker7m
    • Routing and AutoRouting Tiny Arduino in Circuit Maker11m
    • Design Rule Check After Routing PCB30m
  • Generating Manufacturing Output Files  0/2

    • Generating the Gerber and NC Drill Files7m
    • Generate the Bill of Materials4m
  • Conclusion and Bonus Section  0/2

    • Cool Resources for Students1m
    • Taking your PCB Design Skill further4m

Instructors

Ritesh Kanjee has over 7 years in Printed Circuit Board (PCB) design as well in image processing and embedded control. He completed his Masters Degree in Electronic engineering and published a paper for IEEE called Vision-based adaptive Cruise control using Pattern matching (on Google Scholar). His work was implemented in LabVIEW. He works as an Embedded Electronic Engineer in defence research. He has experience in FPGA design with programming in both VHDL and Verilog.

Review

4.2

475 Review

5 stars

0%

4 stars

0%

3 stars

0%

2 stars

0%

1 star

0%